HomeMatic IP HmIP-SWDM Montage- Und Bedienungsanleitung Seite 41

ic IP Radiator Thermostat – basic) for at least 4
seconds to activate the pairing mode (see figure
3). The device LED starts to flash orange. For fur-
ther information, please refer to the operating
manual of the corresponding device.
The device LED lights up green to indicate that pairing has
been successful. If pairing failed, the device LED lights up
red. Please try again.
If no pairing operations are carried out, pairing
mode is exited automatically after 3 seconds.
If you want to add another device first activate
the pairing mode of the existing device and after-
wards the pairing mode of the new device.
If, for example, you want to add another radiator
thermostat, first pair the new radiator thermostat
to the existing radiator thermostat. Afterwards,
you can pair the new radiator thermostat with the
existing window / door contact.
If you are using several devices in one room, you
should pair all devices with each other.
Start-up
41