Important Safeguards - Redmond RMK-M451 Bedienungsanleitung

Carefully read all instructions before operating and save them for future reference. By carefully following these instructions
you can considerably prolong the service life of your appliance.
The safety measures and instructions contained in this manual do not cover all possible situations that may arise during the
operation of the appliance. When operating the device the user should be guided by common sense, be cautious and attentive.

IMPORTANT SAFEGUARDS

• The manufacturer shall not be responsible for any failures arising from
the use of this product in a manner inconsistent with the technical or
safety standards.
• This appliance is a multifunctional appliance and is intended to be used
for nonindustrial use in household and similar spheres of application: at
home, country houses other residential environments. Industrial
application or any other misuse will be regarded as violation of proper
service conditions. Should this happen, manufacturer shall not be
responsible for possible consequences.
• Before plugging in the appliance ensure that the circuit voltage matches
operating voltage of the appliance (see technical specifications or
manufacturer' s plate on the appliance).
• Use an extension cord designed for power consumption of the appliance
as the parameter mismatch may result in a short circuit or fire outbreak.
• The appliance must be grounded. Connect the appliance only to a properly
installed power point. Failure to do so may result in the risk of electrical
shock. Use only grounded extension cords.
CAUTION! While in use the appliance heats up! Care should be
taken to avoid touching the housing, bowl, or any other metal parts
while operating. Make sure your hands are protected before
handling the device. To avoid burns, do not lean over the appliance
while opening the lid.
• Unplug the appliance after use, before cleaning or moving. Remove the
power cord with dry hands holding it by the plug, not cord.
• Do not place the cord in doorframes or by heat sources. Do not twist or
bend the power cord, ensure it is not in contact with sharp objects, corners
and edges of furniture.
PLEASE, NOTE: damaging the cord may lead to a failure that will not
be covered by the warranty. If the cable is damaged or requires replacing,
contact an authorized service centre to have the cord replaced.
• Never place the device on soft surfaces or cover it to keep ventilation
slots clear of any obstruction.
• Do not operate the appliance outdoors to prevent water or any foreign
object or insect from getting into the device. Doing so may result in
serious damage of the appliance.
• Always unplug the device and let it cool down before cleaning. Follow
cleaning and general maintenance guidelines when cleaning the unit.
DO NOT immerse the device in water or wash it in running water!
• When changing the position of the disc heating element it is necessary
to use the tongs, included in set – it will eliminate the possibility of burns
or other accidental injuries.
• When setting the heating disc to the upper position, ensure it is tightly
fixed in the slots on the walls of the working chamber. Incorrect mounting
of the heating element may lead to both its unrestricted displacement
during operation and failure.
Be sure to use a thermal glove for gripping the tongs. Do not touch
the heating disc regardless of the position it's in!
To avoid electrocution do not change the position of the heating
element, if the appliance is plugged in!
Do not close the lid if the disc heating element is set to an upper
position.
RMK-M451
GBR
15