Anti-Blocking Switch (Abs); Trimming Function - UNITED OFFICE ULG 350 A1 Bedienungsanleitung

➩
When you have slid the laminating pouch several
centimetres into the slot
in automatically. Release the laminating pouch
as soon as you notice it being pulled in auto-
matically.
Ensure there is at least 30 cm of open space
in front of the laminator. If you do not, the
laminating pouch will not be completely
ejected from the laminator after lamina-
tion. This could damage the laminated
pouch.
➩
The completed laminated pouch is ejected from
the pouch ejector slot
Only after hot lamination:
When the finished laminated pouch is dis-
charged from the pouch ejector slot
the appliance, it is hot and can easily
change its shape. For this reason, allow
the laminated pouch to cool down for at
least one minute before touching it.
To improve the lamination result, you can
weigh a still hot laminated pouch down with
a book, a file folder or any other heavy,
flat object. This helps achieves a flat and
flawless surface.

11. Anti-Blocking Switch (ABS)

At the start of the lamination process, the pouch
may be pulled in at an angle or jam itself inside the
appliance.
➩
Turn the anti-blocking switch (ABS)
position ABS.
• The laminate pouch is not pulled any further in.
t
, it will start to be pulled
a
of the laminator.
a
o
to the
➩
Remove the laminate pouch.
➩
Turn the anti-blocking switch (ABS)
the desired foil thickness.
➩
Re-start the lamination process.

12. Trimming function

Should you wish to use the trimming function on the
q
pouch guide
➩
When necessary, fold in the document
supports
➩
If not already done, place the trimming attach-
d
ment
pouch guide
➩
Slide the cutting head
cutting head
of
cutting rail
➩
Flap the cutting rail
grip and position the document on the pouch
guide q
pouch format locks
both sides of the document.
➩
Use the markings on the measurement table to
align the document precisely.
➩
Flap the cutting rail
engages.
➩
Hold the paper in a secure position with your
left hand.
➩
To trim, press the cutting head
the right hand and then slide it with one pull or
push over the document.
- 7 -
, dismantle the pouch guide
s
.
so that it forms a level surface with the
q
.
e
to the end stop (the
e
can be slid to both ends of the
w
).
w
upwards with the rounded
. Restrain the document by sliding the
r
together until they touch
w
downwards so that it
e
o
back to
q
.
down with