Anti-Blocking Function; Cleaning - UNITED OFFICE ULG 350 B1 Bedienungsanleitung

NOTICE
► Only after hot lamination: When the finished laminated pouch is
ejected from the pouch ejector slot
easily change its shape. For this reason, let the laminated pouch cool for
one minute before touching it.
► To improve the lamination result, you can weigh a still hot laminated pouch
down with a book, a file folder or any other heavy, flat object. This will
give it a smooth and flawless surface.
♦ If you do not wish to start another laminating procedure, move the On/Off
switch
position.
♦ Disconnect the plug from the mains power socket.

Anti-blocking function

At the start of the lamination process, the pouch may be pulled in at an angle or
jam itself inside the appliance.
♦ Turn the anti-blocking switch
be drawn in.
♦ Remove the pouch and turn the anti-blocking switch
pouch thickness.
♦ Re-start the lamination process.

Cleaning

DANGER
Risk of potentially fatal electrical shock!
► Remove the plug from the mains power socket before beginning to clean
the appliance.
► Ensure that moisture cannot permeate into the appliance during cleaning.
IMPORTANT
Possible damage to the appliance.
► Do not use aggressive or abrasive cleaners as they may damage the surface
of the housing.
♦ Clean the housing of the appliance only with a lightly moistened cloth and
a mild detergent.
│
■ 40 GB
to "OFF" and rotate the pouch thickness switch
5
4
of the laminator, it is hot and can
to the position ABS. The pouch will no longer
4
to the ABS
4
back to the desired
ULG 350 B1