Setting The Water Hardness - K-FEE LATTENSIA + Betriebsanleitung

Setting the water hardness

INFO:
The water hardness essentially indicates how much calcium car-
bonate your water contains. The more calcium and magnesium
ions it contains (these then forming insoluble compounds such
as limescale or lime soaps when dissolved in water), the harder
the water. Hard water leads to limescale deposits and calcifica-
tion of the appliance while soft water is ideal for heating and
better protects the appliance.
INFO:
It therefore essential to set the water hardness, because this in-
fluences the descaling intervals and other functions recommen-
ded by the system, among other things – for optimal protection
to ensure the unimpaired functionality of your capsule machine.
NOTE:
Use the supplied test strip to determine the hardness of your
local water. Fill a cup with water from the water supply. The
colour change on the test strip indicates the water hardness.
Then set this accordingly in the appliance.
1a The water hardness setting has been specified by the system during
the course of the initial start-up. The appliance cannot be used without this.
Press to access the program from here.
1b
You can, however, also modify the water hardness at a later date (for
example after a house move). Then you must trigger the installation program
manually: In the main menu „Settings", go to the „Water hardness" submenu
and press to confirm both.
Test water hardness
Refer to instruction
manual
Step 1 of 3
to continue
36
Favorites
Language
Auto off
Water hardness
4/11
2 Five di erent water hardnesses are provided by the system: very hard, hard,
middle, soft, super soft.
Select water hardness
level
Hard: > 20°d
Middle: > 15°d
Soft: > 10°d
3
In the program, select the water hardness corresponding to your measure-
ment and press to confirm.
Select water hardness
level
Very hard: > 25°d
Hard: > 20°d
Select
1
program
Press to confirm
2
Select the
3
correct water
hardness
Press to confirm
4