Using The Steam System Drip Tray - K-FEE LATTENSIA + Betriebsanleitung

Using the steam system drip tray

WARNING!
Very hot water – risk of scalding!
The drip tray for the steam system is fixed to the inside of the front cover. It collects hot water and condensate resulting from the following applications: the
preparation of all beverages containing milk, the activation of the CLEAN button, rinsing and cleaning the milk and co ee system as well as purging the system
with steam. We therefore recommend emptying the steam system drip tray at regular intervals. The use of the steam system drip dray is only indicated auto-
matically by the relevant program during descaling. Please follow the instructions on the display at this point.
To empty the drip tray, please proceed as follows:
1 Open the handle to eject the inserted capsule (a). Then remove the drip
tray for the co ee spout (b). Now remove the front cover by gripping the drip
tray slot with your fingers and pull the cover forwards (c). Finally, please re-
move the used capsule container (d).
Caution: The steam system drip tray can contain very hot water!
d
c
b
10
a
Please note:
The display does not indicate if the drip tray for the steam system
is full. Therefore, please empty it at regular intervals.
2 Now empty the removed drip tray and dry it using a soft cloth.
3
Finally, please place all components back in the machine: return the used
capsule container to the slot above the steam system drip tray, push the front
cover back in front of the opening until it clicks into place, and finally press
the drip tray for the co ee spout back into the slot.
The machine is then
automatically ready
for use again.