Setting Up The Drip Tray - K-FEE LATTENSIA + Betriebsanleitung

Setting up the drip tray for the beverage spout
Before preparing a beverage, you must always adjust the drip tray for the
spout to the selected beverage and cup size.
1
Insert the drip tray into the lower slot if extra large cups and glasses are
used.
The upper drip tray slot is intended for espresso beverages and for the use
2
of all small cups.
Please note: To insert the drip tray into the selected slot, posi-
tion it at a slight angle from above, then push it in until it clicks
into place. When pulling out the drip tray, first lift it slightly and
then remove.
1
Lower slot
2
upper slot
9