Initial Start-Up - K-FEE LATTENSIA + Betriebsanleitung

Initial start-up

SAFETY NOTE!
Before using this appliance for the first time, read the safety
information on pages 4–7.
WARNING!!
Before using this appliance for the first time, check that the
voltage of your supply corresponds to that stated on the
rating plate (on underside of appliance).
WARNING:
Very hot water – scalding hazard!
NOTE!
1. If the appliance has been subjected to very cold tempera-
tures or frost, please wait at least three hours before swit-
ching it on. Allow the appliance to warm up to room tempera-
ture first – risk of malfunctions.
2. We recommend using a water filter for long-lasting, maxi-
mum co ee enjoyment. Please insert this as part of the initial
start-up. For more information, please read the instructions
on pages 32–33.
1 Before using the appliance for the first time, please remove the water tank
and milk bottle, rinse them out with a mild cleaning solution and dry using a
soft cloth.
2
Connect the appliance to the electricity supply. The handle must be clo-
sed. The appliance recognises when it is operated for the first time and auto-
matically guides you through the initial operation. Simply follow the instruc-
tions on the display.
16
3 First select the desired language.
Welcome
English
German
4 Set your local water hardness.
4.1. The appliance allows you to choose between various water hardnesses
(including hard, middle, soft). Test your domestic water hardness using the
supplied test strips.
4.2 Scroll up or down using the arrow buttons until you have found the ap-
propriate water hardness. When this lights up, press
information on water hardness see p. 36.
Select water hardness
level
Hard: > 20°d
Middle: > 15°d
Soft: > 10°d
Select
1
Press to confirm.
2
to confirm. For more
Select
1
Press to confirm.
2