Herunterladen Diese Seite drucken

Cleaning, Descaling And Changing Filter If Required; Water Hardness; Frequently Asked Questions; Specifications And Servicing - K-FEE Grande Original Bedienungsanleitung

Kapselmaschine
Vorschau ausblenden Andere Handbücher für Grande:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Frequently Asked
EN
The cup symbols and the rinse symbol and/or "replenish water" symbol flash fast?
Questions
Switch off and disconnect machine from mains, allow to cool down. Wait for at least 1 min-
ute; insert the plug into the mains and switch the machine back on. Contact service centre if
error recurs.
Drink not dispensed properly?
Press the lever down completely. If necessary, descale the appliance – refer to the section

"Cleaning, descaling and changing filter if required".

Drink dispensed with delay?
Appliance is re-heating.
Is the spent capsule container overfull and jammed?
Caution!
The machine will only work
Try to remove the spent capsule container by jogging the container gently to and fro.
with beverage capsules of those
After inserting a capsule, the lever cannot be closed completely?
brands carrying the K-fee
– your
®
Check that there is no used capsule in the brewing chamber, that the container for used cap-
system logo.
sules is not overfull and that the newly inserted capsule is in the correct position.
The use of non-original capsules
Is the beverage not hot enough?
can involve the following risks: risk
to health, damage to the appliance
If necessary, descale the appliance – refer to the section "Cleaning, descaling and changing
and the possible loss of warranty
filter if required".
rights.
All cup symbols do not stop flashing?
In such a case, switch off appliance and allow to cool down before using it again.
Reset appliance to factory settings?
Switch off the machine and unplug the mains cord from the wall socket. Hold down both the
rinse button and on/off button and plug in the machine; then release both buttons. As confir-
mation, the 3 cup symbols light up briefly on the display.
What is Eco mode?
The machine switches off automatically and returns to Eco mode when it is unused for more
than 5 minutes (factory setting). The appliance uses considerably less energy in Eco mode (less
than 0.5 W) than when it is heated up and ready for operation.
For further information re-
Overview of water
garding water hardness in
hardness:
your area, contact your water com-
Hardness range
pany. The water hardness level en-
tered in the appliance determines
1 - soft
the interval between descaling for
2 - medium
optimal operation.
3 - hard
52
EN
EN
Water hardness in
Water hardness in German degrees of
mmol
hardness (°d)
< 1.3
< 7
1.3 - 2.5
7 - 14
2.5 - 3.8
14 - 21
220 - 240 V, ~ 50 Hz, max. 1455 W
1.45 m
P
max. 19 bar
approx. 3.5 l
approx. 4.5 kg
A = 200 mm
C
B = 406 mm
A
B
C = 316 mm
max. 160 mm
10°C - 45°C
~ 90°C
Noise emissions do not exceed 70 dB(A)
Please send us an e-mail or call us if you
) Germany: +49 (0)1807 / 88 77 88
have any questions or suggestions:
(30 sec. free of charge, thereafter
www.k­fee.com
EUR 0.14 €/ min. from a German landline,
mobile max. EUR 0.42 €/ min.)
Information on automatic switch­off
The machine switches off au-
The machine uses considerably less energy in
tomatically and returns to Eco
Eco mode (less than 0.5 W) than when it is
mode when it is unused for more
ready for operation. However, if you do want
than 5 minutes (factory setting).
to change this parameter, please refer to the
For the sake of the environment, we recom-
instructions in chapter "Parameter setting:
mend keeping the factory setting.
automatic switch-off".
Specifications and
EN
servicing
53

Werbung

Kapitel

loading