K-FEE LATTENSIA + Betriebsanleitung Seite 57

Initial start-up
5a The appliance now asks if you would like to use a water filter. If yes,
press to confirm. Continue from point 6.
5b
If no or later, select the down arrow and press OK to confirm. Continue
from point 7.
5a Confirm the insertion of a water filter
with
Use waterfilter?
Yes
No
6
When using a water filter for the first time, please place a heat-resistant
cup under the beverage spout first. Then remove the water tank, insert the
water filter and fill the tank with water. Then put the tank back in the applian-
ce and press to confirm.
The appliance is rinsed automatically.
For more information on using and replacing the water filter, please see to
pages 32–33.
After rinsing, empty the cup. The appliance is ready for use. If you would like
to prepare a beverage, please press
(recommended).
5b To decline, press the
down arrow until „No"
is selected and press
to confirm.
Priming cycle
to pause
first.
7 If you do not want to insert a water filter now, please place a heat-resis-
tant cup under the beverage spout first.
Then remove the water tank, fill with water and place back in the machine.
Press to confirm. The system is rinsed automatically and is then ready for
use.
NOTE:
Initial start-up from standby mode
To start the system from standby mode,
press any operating button, open the hand-
le or remove the capsule container.
The K-fee® – your system logo appears on
the display while the appliance is heating
up. The system is ready for use when it rea-
ches 60ºC.
17