Programming The Cup Capacity - K-FEE Wave Betriebsanleitung

1
2
Fill quantity
100 ml
Factory setting
45 ml
30 ml
1
2
Fill quantity
200 ml
Factory setting
110 ml
80 ml
Keep the "small cup" or "large cup" button depressed for a minimum of
3 seconds in order to start the programming. Keep the button depressed
until the required fill quantity has been reached.
The new fill quantity remains stored (even after a mains failure).
3 seconds
min
3 seconds
min
3
3
Programming the
cup capacity
First insert a capsule
before programming the
cup capacity.
Risk of scalding!
Very hot beverage.
It is possible to reset
the machine to the
factory settings. To do
this, read the last frequently
asked question on page 43.
33
EN