Vacuum-Packing Vacuum Containers And Bags (With Valve) - Silvercrest SV 125 B2 KAT Bedienungsanleitung

8.2 Vacuum-packing
vacuum containers and
bags (with valve)
This function allows you to vacuum-pack
vacuum containers and bags with valves
from various different manufacturers. For the
different valves, the following adapters are
included in the items supplied:
Adapter
Adapter A 20
Adapter B 21
Adapter C 22
DANGER! Risk of electric
shock due to moisture!
Ensure that no liquid is sucked in during
the extraction of air. If this nevertheless
occurs, immediately interrupt the pro-
cess by pressing the active function but-
ton 2 again.
Please comply with the manufacturers'
instructions regarding the filling levels
for containers and bags.
NOTE: The vacuum containers and bags
are not included in the items supplied.
Vacuum containers
1. Fill the vacuum container to the maxi-
mum filling level and close the contain-
er lid.
2. Press one end of the vacuum tube 19
into the connection 8 on the right of the
device.
3. Fit the adapter 20/21/22 suitable for
the valve onto the other end of the vacu-
um tube 19.
e.g. suitable for
Ernesto, FoodSaver
Lunchboxes
FoodSaver fresh-
ness containers
CASO, FoodSaver
storage boxes
4. Press the adapter A 20 or B 21 onto
the valve of the vacuum container. Hold
the adapter firmly in place.
Or:
Insert
adapter C 22 into the valve of
the vacuum container.
5. Press the button
lights up. The vacuum-packing process
starts.
6. After the vacuum-packing process, the
LED goes out and the vacuum-packing
process is complete.
7. Remove the vacuum tube 19 and the
adapter 20/21/22 from the vacuum
container and repeat the process if nec-
essary with another container.
8. After you have finished vacuum-pack-
ing, remove the vacuum tube 19 from
the connection 8.
Vacuum bags with valves
1. Place the prepared food into the vacu-
um bag. Ensure that there is no food un-
der the valve.
2. Carefully close the vacuum bag.
8
19
21
8
19
22
2. The LED
9
GB