Environmental Regulations And Disposal Information - Silvercrest SDI 3500 B2 Bedienungsanleitung Und Sicherheitshinweise

Problem
Error E0 is shown on
the display (8)
Error E3 is shown on
the display (8)
Error E6 is shown on the
display (8)
Error E1, E2, E4, E5,
E7, E8 or Eb is shown
on the display (8)

10. Environmental regulations and disposal information

A symbol depicting a crossed-out rubbish bin on a product means it is subject to European
Directive 2012/19/EU. All electrical and electronic appliances must be disposed of
separately from household waste at official disposal centres.
This appliance may not be disposed of as domestic waste. Information on collection points
and pick-up times can be obtained from your local council or waste disposal company.
Dispose of all packaging in an environmentally friendly manner. Cardboard packaging can
be taken to paper recycling centres or public collection points for recycling. Any film or plastic
contained in the packaging should be taken to your public collection points for disposal.
Possible cause
No pan on the heating
zone (1 or 3)
Incorrect heating zone (1,
3) switched on
Cookware not suitable for
induction
Cookware is too small in
diameter or not standing
centrally on the heating
zone (1 or 3).
Heating zone (1, 3)
temperature too high
Empty pan
Cooling fan faulty
Technical fault
Remedy
Place a pan on the heating zone (1 or 3).
Switch the correct heating zone (1 or 3) on or
move the pan to the heating zone (1 or 3) you
have switched on.
Only use cookware which is suitable for
induction hotplates.
Only use cookware with a diameter of between
10 and 22 cm and place it on the centre of the
heating zone (1 or 3).
Wait a few minutes until the heating zone (1 or
3) has cooled down.
Fill the pan with food.
Contact our hotline. See the "Warranty
information" on page 56.
Contact our hotline. See the "Warranty
information" on page 56.
SilverCrest SDI 3500 B2
English - 55