Checking The Battery Charge Level; Trimmer Settings; Manner Of Operation - FLORABEST FRTA 20 A1 Originalbetriebsanleitung

GB
After turning off the appli-
ance, the trimming assembly
will keep revolving for some
time. Allow the trimming as-
sembly to come to a stand-
still. Neither touch nor slow
down the moving cutting in-
sert. Risk of injury!
Checking the battery charge
level
The battery's ( 16) charge level is indica-
ted by the charge state indicator (
Press the button on the charge level indica-
tor ( 18a) on the battery.
The charge level of the battery is indicated
by illumination of the corresponding LED
light.
3 LEDs are on: Battery charged
2 LEDs are on: Battery partially charged
1 LED is on: Battery needs to be charged
Only charge the battery (
when the red LED on the charge
level indicator (

Trimmer settings

To adjust the auxiliary handle:
The auxiliary handle can be set to various
positions. Adjust the handle such that the
cutting disk slightly tilts forward in your
working position.
Loosen the screw (23) in the handle

and move the auxiliary handle (5) to
your favourite position. Tighten the
screw in the handle.
16
18) .
16)
18) is on.
To adjust the height:
The telescopic shaft allows you to adjust
the appliance to your personal size.
Loosen the threaded bush
‚
(8). Adjust the telescopic shaft (9)
to the correct length and tighten the
threaded bush.
To adjust the cutting angle:
Changing the cutting angle lets you trim
grass at places that a difficult to reach,
e.g. under benches or wall offsets.
Tread on the pedal (15) on the motor
ƒ
housing and tilt the telescopic shaft
(9). There are 7 preset tilt angles (see
"Work instructions").
To adjust the handle rod:
The handle rod can be turned by 90° and
180° (see "Work instructions").
Push down the lock (7) and turn the
„
0° 90° 180°
handle rod
snaps into your favourite position.
To adjust the spacer bow
(flower guard): The spacer bow keeps
the trimming assembly away from plants
and trunks not to be cut.
Push the spacer bow (11) forward.
…
When the spacer bow is not in use you
can move it back to its parking position.

Manner of operation

WARNING. Danger of injury!
• Do not cut moist or wet grass.
• Prior to starting the appliance,
check that the cutting disk does
not contact stones, gravel or
other foreign bodies.
(6) until it