Jacuzzi J-200 series Montageanweisung Und Bedienung Und Wartung Seite 32

Treble Setting
Press the Audio button 2 times to access the treble setting. The
LCD display will change to "TRE 0, " . Press the Up button to adju-
st the setting to a maximum of +7. Press the Down button to
adjust the setting down to -7.
Note: The default setting is "0." This feature is disabled when
a "Digital Sound Processor" (DSP) setting is active such as
"Rock," "Classical," or "Pop."
Balance Setting
Press the Audio button 3 times to access the balance setting.
The LCD display will change to "BAL L=R, " . Press the Up but-
ton to adjust the setting to a maximum of 10R (only the right si-
de speakers will have volume). Press the Down button to adju-
st the setting down to 10L (only the left side speakers will ha-
ve volume).
Fade Setting
Press the Audio button 4 times to access the fade setting. The
LCD display will change to "FAD F=R, " . Press the Up button to
adjust the setting to a maximum of 10F (only the front speakers
will have volume). Press the Down button to adjust the setting
down to 10R (only the rear speakers will have volume).
Digital Sound Processor (DSP) Setting
Press the Audio button 5 times to access the DSP setting. The
LCD display will change to "DSP OFF, " . Press the Up button to
select one of the preset settings such as Rock, Classical or Pop.
If a preset setting is select a small icon will appear
ROCK
on the LCD display.
Area Setting
Press the Audio button 6 times to access the Area setting. The
LCD display will change to "AREA USA, " . Press the Up button to
select either USA or EUR setting.
Loud Setting
Press the Audio button 7 times to access the Loud setting. The
LCD display will change to "LOUD OFF, " . Press the Up button to
select either OFF or ON.
Distant Setting
Press the Audio button 8 times to access the Distant setting. The
LCD display will change to "DX, " . Press the Up button to select
either Distant (DX) or Local for station frequency. The "LOCAL"
setting allows for better FM reception when a local station is too
strong. Leave the setting to "DX" if this condition does not exi-
st.
Stereo Setting
Press the Audio button 9 times to access the Stereo setting. The
LCD display will change to "STEREO, " . Press the Up button to
select either Stereo or Mono.
Wireless Remote Control Functions
A wireless radio frequency (RF) remote control is supplied on
all spas with the optional audio system. This remote provides con-
trol of the radio and over some media device functions.
External Media Device Playback
The supplied remote control provides no control over external
Auxiliary player operations except for volume control and sour-
ce selection. The Auxiliary player performs all external playback
operations.
Power Button: Press once to turn ON; Press again to
turn OFF.
Audio Button: Allows access to most of the stereo
AUDIO
sound functions. Press continuously to scroll through the
following settings: Bas-Tre- Bal-Fad-DSP-Area-Loud-DX-
Stereo.
Mode Button: Press continuously to switch between "RA-
MODE
DIO, " "USB, " and "AUX IN" modes. "BT CONNECTED" ap-
pears when a Bluetooth device in paired with the stereo.
Volume Up Button: Used to increase volume between
0 to 30.
Volume Down Button: Used to decrease volume
between 30 to 0.
USB Mode: Press to pause track, press again to resu-
me playing (Device Mode USB)
Mute Button: Press to mute sound, press again to reac-
tivate sound (Radio Mode)
Track Down Button: Press to rewind tracks (Device
Mode USB)
Seek Button: Seeks down for stations (Radio Mode)
Track Up Button: Press to move forward tracks
(Device Mode USB)
Seek Forward Button: Seeks forward for stations
(Radio Mode)
32
AUDIO MODE
1 2 3
DIR - DIR + REPEAT RANDOM