Angelo Po 090FAVA Bedien- Und Installationshandbuch Seite 41

SWITCHING THE PLATE BURNER ON AND OFF
Lighting
Important
The first time the griddle is switched on,
wash the plate to remove the protective
grease and any dirt, then switch on the ap-
pliance and preheat it for about 1 hour at
the minimum power setting.
1 - Turn on the gas supply tap.
2 - Press the knob (B) and turn it anti-clockwise
(pos. 1), while keeping button (C) pressed, to
light the pilot light.
3 - Keep the knob pressed for about 15 sec. to
prime the thermocouple. The pilot light can also
be lit by hand through the hatch (A).
4 - Turn the knob anti-clockwise (pos. 2) to light the
burner.
5 - Turn the knob gradually anti-clockwise to adjust
the power of the flame down to the minimum
setting.
Turning off
1 - Turn the knob clockwise (pos. 3) to turn the
burner off. The pilot light will remain on to allow
the burner to be re-lit.
2 - Turn the knob clockwise (pos. 4) to turn off the
pilot light.
3 - Turn off the knob to ensure safety.
C
1
4
- 9 -
A
B
2
3
IDM-39615200500.tif
IT
GB
DE
FR
ES
English