Technical Data; Safety Devices; Safety And Information Signs - Angelo Po 090FAVA Bedien- Und Installationshandbuch

See tables and "Connection chart" at the back of
the manual.
Although the appliance is complete with all safety
devices, during installation and connection addi-
tional devices must be added if necessary to com-
ply with the relevant legal requirements.
The illustration shows the position of the devices.
A)Gas supply tap: for turning the connection to the
gas supply line on and off.
B)Safety thermocouple: cuts out the gas supply if the
flame goes out
Caution - warning
Make a daily check that the safety devic-
es are properly installed and in good
working order.
IT
IT
The illustration shows the position of the signs pro-
vided.
GB GB
A)Nameplate with manufacturer and appliance
data.
DE DE
B)General hazard: read the manual carefully before
carrying out any procedure.
C)General hazard: when washing the appliance do
FR FR
not point pressurised water jets at internal parts.
D)General hazard: all relevant regulations must be
ES
ES
complied with. "Install in compliance with the rele-
vant regulations and use in well ventilated premises
only".
E)General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of fail-
ure to comply with the installation and commission-
ing instructions".
F) Burn hazard: watch out for hot surfaces.
G)CE marking: indicates that the appliance is compli-
ant with the relevant norms.
English

TECHNICAL DATA

SAFETY DEVICES

SAFETY AND INFORMATION SIGNS

B
G
A
- 6 -
B
A
IDM-39615200300.tif
D
E
C
IDM-39614600500.tif
F
B