Eliwell DR4000 series Handbuch Seite 8

The Unicard/Copy Card is an accessory connected to the TTL serial port used for quick programming of the
device parameters (upload and download a parameter map to one or more devices of the same type).
The upload (label UL), download (label dL) and Unicard/copy card formatting (label Fr) operations are
performed as explained below:
1
Tun. S.Str out1 aux out2
The controls necessary for using
the Unicard/Copy Card are present
inside the 'FPr' folder contained
level 1 of the programming menu.
Press "set" to access the functions.
Download from reset: Connect the Unicard/Copy Card with
the device OFF.
The programming parameters are uploaded when the
instrument is switched on; once the lamp test is concluded,
the display shows the following for about 5 seconds:
• label dLY if copy operation is successful
• label dLn if operation fails
NOTES:
• after the parameters have been uploaded from
reset, the instrument will use the newly uploaded
map settings.
• see FPr folder in 'Parameters' on pages 4-5
UNICARD / COPY CARD
2
SET
Press
through the functions until the
desired function is displayed. Press
set
the
function (upload, download or
formatting) will be executed.
SET
Tun. S.Str out1 aux out2
and to scroll
key and the selected
3
aux
Tun. S.Str out1 out2
Tun. S.Str out1
If the operation is successful, the
display will show y, otherwise it
will show n.
UPLOAD
DOWNLOAD
SET
aux out2
OR