Eliwell DR4000 series Handbuch Seite 10

To access the "USER Menu", hold down the
the "PA1" access PASSWORD will be requested (see "PASSWORD" section). Press the
key to edit the parameter values. The display will show the first parameter in the menu (e.g.
parameter "dF1"). Use the
menu:
Select the desired parameter using the
To change the value, press the
value (shown on the second line) using the
keys to store the new value.
fnc
NOTE: It is advisable to switch the instrument off then back on again each time parameters
are modified to prevent malfunction of the configuration and/or timer operations underway.
and
Tun. S.Str out1 aux out2
set
SET
Tun. S.Str out1 aux out2 Tun.
"USER" Menu
key for more than 5 seconds. If enabled,
set
keys to scroll through all the parameters in the
5 sec
SET
Tun. S.Str out1 aux out2
Tun. S.Str out1
Tun.
and
key. The parameter label will start to blink. Change the
and
S.Str out1 aux out2
Tun. S.Str out1 aux out2
aux out2
S.Str out1 aux out2
keys.
keys, then press the
SET
aux
Tun. S.Str out1 out2
set
or
set