Colour System Setting (Av Mode Only); Av Selection - Pioneer PDP-503HDE Bedienungsanleitung

Useful adjustment settings
AV
SELECTION
MENU
ENTER
/
Mode selection for the INPUT 1 to 4 terminal
AV SELECTION: STANDARD
AV SELECTION: DYNAMIC
AV SELECTION: MOVIE
AV SELECTION: GAME
AV SELECTION: USER
Mode selection for the PC terminal
AV SELECTION: STANDARD
AV SELECTION: USER
PDP-503HDE/(E)-e
MENU
Option
Colour Sys. [PAL]
AUTO
PAL
PAL-60
SECAM
NTSC 3.58
NTSC 4.43
50

Colour system setting (AV mode only)

You can change the colour system to one that is
compatible with the image on the screen.
1
Press MENU.
2
Press / to select "Option", and then press
ENTER.
3
Press / to select "Colour Sys.", and then press
ENTER.
4
Press / to select a compatible video signal
system of your equipment, and then press ENTER.
5
Press MENU to exit the menu.
A
• Factory preset value is "AUTO".
• If "AUTO" is selected, colour systems for each channel
are automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• Return to the previous menu by pressing n.

AV selection

AV selection gives you five viewing options to choose
from to best match the Plasma Display System
environment, which can vary due to factors like room-
brightness, type of programme watched or the type of
image input from external equipment.
1
Press AV SELECTION.
• Present AV selection mode displays.
2
Press AV SELECTION again before the mode
displayed on the screen disappears.
• The mode changes as shown left.
Selected item
For a highly defined image in a normally
STANDARD
bright room
For a clear-cut image emphasising high
DYNAMIC
contrast for sports viewing.
For a movie
MOVIE
Lowers image brightness for easier viewing
GAME
Allows the user to customise settings as
USER
desired. You can set the mode for each
input source.
8/31/02, 5:40 PM
Description
50