Auto Sync. Adjustment (Pc Mode Only); Fine Sync. Adjustment (Pc Mode Only) - Pioneer PDP-503HDE Bedienungsanleitung

Useful adjustment settings
MENU
ENTER
/ /
MENU
Fine Sync.
H-Pos.
V-Pos.
Clock
Phase
Reset
RETURN
Selected item
Centres the image by moving it to the left or
H-Pos.
right.
Centres the image by moving it to the up or
V-Pos.
down.
Clock
Adjusts the clock frequency.
Adjusts the clock phase.
Phase
PDP-503HDE/(E)-e
MENU
Option
Auto Sync.
Fine Sync.
Audio Out [Fixed]
RETURN
/
Auto Sync.
Adjusting the image
Option
[0] –90
[0] –60
[0] –90
[0] –20
Description
48

Auto Sync. adjustment (PC mode only)

For automatically adjusting the computer image.
1
Press MENU.
2
Press / to select "Option", and then press
ENTER.
3
Press / to select "Auto Sync.", and then press
ENTER.
• Auto Sync. starts and "Adjusting the image." displays.
A
• Return to the previous menu by pressing n.
• When Auto Sync. is successful, "Auto Sync completed
successfully" displays. If not, Auto Sync. failed.
• Auto Sync. may fail even if "Auto Sync completed
successfully" displays.
• Auto Sync. may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the
PC image and try again.
• Be sure to connect the computer to the Media Receiver
and switch it on before starting Auto Sync.
32%

Fine Sync. adjustment (PC mode only)

Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
+90
1
Press MENU.
+60
2
+90 Press / to select "Option", and then press
ENTER.
+20
3
Press / to select "Fine Sync.", and then press
ENTER.
4
Press / to select the specific adjustment item.
5
Press / to adjust the item to your desired
position.
6
Press MENU to exit the menu.
A
• When all adjustments set to factory preset values,
1 Press / to select "Reset", and then press ENTER.
2 Press / to select "Yes", and then press ENTER.
• Return to the previous menu by pressing n.
8/31/02, 5:40 PM
48