Basic adjustment settings
MENU
Decoder menu
Programme Setup "Manual"
01
SAT.1
02
PRO7
03 KABEL
Programme Setup "Manual"
01
SAT.1
02
PRO7
03 KABEL
29
PDP-503HDE/(E)-c
ENTER
/
/
/
Decoder
Off
INPUT1
INPUT2
INPUT3
Lock menu
Lock
Off
On
29
Setting the decoder
When connecting a decoder to, you need assign the
terminal input.
On Programme Setup "Manual" menu
1
Press
/ / /
to select the channel you want to
edit, and then press ENTER.
• The selected channel information displays.
2
Press
/
to select "Decoder", and then press
ENTER.
• Terminal inputs are displays.
3
Press
/
to select an INPUT terminal, and then
press ENTER.
A
• "Off" is factory preset value. When set to "Off", you cannot
watch any image from decoders.
• Return to the previous menu by pressing n.
• Exit the menu by pressing MENU.
Setting the child lock
You can block the viewing of any channel.
On Programme Setup "Manual" menu
1
Press
/ / /
to select the channel you want to
edit, and then press ENTER.
• The selected channel information displays.
2
Press / to select "Lock", and then press ENTER.
• Child lock menu displays.
3
Press
/
to set "Lock" to "On", and then press
ENTER.
A
• Even if set to "On", this function never works if not setting
password, See page 54 for the details on password
setting.
• Return to the previous menu by pressing n.
• Exit the menu by pressing MENU.
8/31/02, 5:48 PM