Picture Adjustments - Pioneer PDP-503HDE Bedienungsanleitung

Basic adjustment settings

Picture adjustments

Adjust the picture to your preference with the following picture settings.
AV SELECTION
MENU
Adjustments items for AV source
MENU
Picture
DYNAMIC
Contrast [+30]
Bright [0]
Colour [0]
Tint [0]
Sharp [0]
Advanced
Reset
RETURN
Selected item
Contrast
For less contrast
Bright
For less brightness
For less colour
Colour
intensity
Skin tones become
Tint
purplish
Sharp
For less sharpness
A
• Select "Advanced" and then press ENTER to set "Colour
Temp", "Black", "Black & White" or "PureCinema" settings.
See pages 33 and 34.
PDP-503HDE/(E)-c
ENTER
/ / /
AV selection mode
0 +40
–30 +30
–30 +30
–30 +30
–7 +7
button
button
For more contrast
For more brightness
For more colour
intensity
Skin tones become
greenish
For more sharpness
32
1
Press MENU.
2
Press / to select "Picture", and then press
ENTER.
• Picture menu displays.
3
Press / to select a specific adjustment item.
4
Press / to adjust the item to your desired
position.
5
Press MENU to exit the menu.
A
• When all adjustments set to factory preset values,
1 Press / to select "Reset", and then press ENTER.
2 Press / to select "Yes", and then press ENTER.
• Return to the previous menu by pressing n.
• If you select "STANDARD" with AV SELECTION on the
remote control unit, these items will display in gray
and not be selectable. See page 50.
Adjustments items for PC source
MENU
Picture
USER
Contrast [+30] 0
Bright [0] –30
Red [0] –30
Green [0] –30
Blue [0] –30
Reset
RETURN
Selected item
button
Contrast
For less contrast
Bright
For less brightness
Red
For weaker red
Green
For weaker green
Blue
For weaker blue
8/31/02, 5:48 PM
AV selection mode
+40
+30
+30
+30
+30
button
For more contrast
For more brightness
For stronger red
For stronger green
For stronger blue
32