Cleaning And Maintenance - Rommelsbacher EKS 1500 Bedienungsanleitung

Step 8:
Remove the vessel.

Cleaning and maintenance

Switch the appliance off before cleaning and always pull the mains plug!
Do not immerse appliance, power cord and plug in water nor clean it under running water!
Attention – hazard of injury and burns! Prior to cleaning casing and accessories, let the
complete appliance cool down!
gasket is always clean and without residues.
dishwashing detergent and wipe dry afterwards.
the screw on the inside and remove the small sieve insert. Pierce sieve and holes carefully with the attached cleaning
pin so that they remain free. Afterwards, assemble the sieve and tighten the screw.
Remove the stainless steel bush of the hot water/steam nozzle and clean it thoroughly. Make sure that the outlet
holes at the underside as well as the small openings in the upper area of the bush are always free.
Clean the hot water/steam nozzle with a damp cloth. Make sure the outlet hole at the underside is always free.
Touch the stainless steel nozzle at
its shaft for removing, turn it to the
right and unlock it.
Then, pull the stainless steel nozzle
down.
36
Step 9: Step 10:
If the appliance is not needed any Clean the appliance and the
more, switch it off and pull the accessories.
mains plug.
Clean the outlet hole of the hot
the shaft for attaching it and push the
nozzle on.
Please refer to
"Cleaning and maintenance"
for further information.
Touch the stainless steel nozzle at
Then, turn it to the left and lock it.