Inserting The Water Filter - Rommelsbacher EKS 1500 Bedienungsanleitung

Inserting the water filter
will be cleared by rinsing the filter.
Warning: Casing, brew head, Step 1:
portafilter, filter inserts and hot Unpack the filter cartridge.
water/steam nozzle are getting hot
Step 4: Step 5:
Position the filter cartridge firmly in Fill the water tank with fresh tap
the intended holder at the bottom of
the water tank.
Step 8: Step 9:
Place a vessel below the outlet of Choose the function
the hot water/steam nozzle. "espresso/hot water".
Step 2: Step 3:
Prepare filter cartridge. Remove the water tank
Steep the filter cartridge for 15 (previously remove the portafilter if
minutes at least in cold tap water. necessary).
Empty residual water.
Step 6: Step 7:
Insert the water tank. Position the portafilter without filter
Make sure the water tank is inserted insert at the marking of the brew
as far as it will go on the gasket. head and lock it by turning it to the
right as far as it will go.
Step 10: Step 11:
Switch the appliance on. Start hot water supply.
The operation pilot lamp glows Turn the rotary knob to the right.
permanently. Dispense hot water for 1 minute. Use
The appliance heats up and the the water for warming the cups.
red temperature pilot lamp glows
permanently.
When the lamp extinguishes, the
appliance is ready for use.
29