Power Save Mode; Frothing Milk - Rommelsbacher EKS 1500 Bedienungsanleitung

Power save mode:

Step 14:
After 10 min. without operation, If the appliance is not needed any
the appliance switches to power more, switch it off and pull the
save mode, without heating of the mains plug.
thermoblock. The pilot lamp blinks
slowly (every 2 sec.).
By actuating the switch ON/OFF, the
appliance can be activated again.
After a short heating-up phase, the
appliance is ready for use.

Frothing milk

and slightly move it up and down. The nozzle must remain under the milk surface as otherwise the milk froth will be
too large-pored. (After a few trials and with a little practice, you will quickly fi nd the correct method).
Attention: Make sure that the holes in the nozzle are always clean and not clogged.
Attention: For moving the nozzle, only touch it at the upper plastic part.
Attention:
Warning: Casing, brew head, Step 1:
portafi lter, fi lter inserts and hot Prepare the appliance.
water/steam nozzle are getting hot
Step 15:
Clean the appliance and the
accessories.
regularly, refi ll water if
necessary.
regularly, empty it if
necessary.
Step 2:
Position the portafi lter without fi lter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Nähere Informationen
hierzu fi nden Sie unter
Step 3:
Place a vessel below the outlet of
the hot water/steam nozzle.
33