Bleeding The System - Rommelsbacher EKS 1500 Bedienungsanleitung

Bleeding the system

a longer non-use period.
Warning: Casing, brew head,
portafilter, filter inserts and hot
water/steam nozzle are getting hot
Step 4:
Position the portafilter without filter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Step 8:
Start hot water supply.
Turn the rotary knob to the right.
Dispense hot water until it comes
without air. Use the water for
warming the cups.
28
Step 1: Step 2:
Remove the water tank Fill the water tank with fresh tap
(previously remove the portafilter if water.
necessary).
Step 5: Step 6:
Place a vessel below the outlet of Choose the function
the hot water/steam nozzle. "espresso/hot water".
Step 9:
Stop hot water supply.
Turn the rotary knob to the top.
NOTE: The appliance carries excess
water back into the water tank via a
Step 3:
Insert the water tank.
Make sure the water tank is inserted
as far as it will go on the gasket.
Step 7:
Switch the appliance on.
The operation pilot lamp glows
permanently.
The appliance heats up and the
red temperature pilot lamp glows
permanently.
When the lamp extinguishes, the
appliance is ready for use.