Rommelsbacher EKS 1500 Bedienungsanleitung Seite 38

Step 5:
Position the portafilter without filter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Step 9:
Start the descaling process. Turn the
rotary knob to the left. Dispense 1/3
of the decalcifier.
Step 13:
Place a collecting vessel below the
outlet of the hot water/steam nozzle.
38
Step 6: Step 7:
Place a vessel below the outlet of Choose the function
the portafilter. "espresso/hot water".
Step 10: Step 11:
Stop the descaling process. Switch the appliance off.
Turn the rotary knob to the top.
NOTE: The appliance carries excess Wait for 8 – 10 minutes so that
water back into the water tank via a the decalcifier can soak.
Step 14: Step 15:
Choose the function Switch the appliance on again.
"espresso/hot water". The operation pilot lamp glows
permanently.
The appliance heats up and the
red temperature pilot lamp glows
permanently.
When the lamp extinguishes, the
appliance is ready for use.
Step 8:
Switch the appliance on.
The operation pilot lamp glows
permanently.
The appliance heats up and the
red temperature pilot lamp glows
permanently.
When the lamp extinguishes, the
appliance is ready for use.
Step 12:
twice.
Check the collecting vessel regularly,
empty it if necessary.
Step 16:
Start the descaling process. Turn the
rotary knob to the right. Dispense
decalcifier for 15 seconds.