Refilling The Water Tank - Rommelsbacher EKS 1500 Bedienungsanleitung

Step 12:
Stop hot water supply.
Turn the rotary knob to the top.
NOTE: The appliance carries excess
water back into the water tank via a
Refilling the water tank
Warning: Casing, brew head,
portafilter, filter inserts and hot
water/steam nozzle are getting hot
Step 4: (bleeding)
Position the portafilter without filter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
30
regularly, refill water if
necessary.
empty it if necessary.
pump noises.
Repeat step 11 + 12 Step 13:
3 times. If the appliance is not needed any
more, switch it off and pull the
mains plug.
Step 1: Step 2:
Remove the water tank Fill the water tank with fresh tap
(previously remove the portafilter if
necessary).
Empty residual water.
Step 5: (bleeding) Step 6: (bleeding)
Place a vessel below the outlet of Choose the function
the hot water/steam nozzle. "espresso/hot water".
Step 3:
Insert the water tank.
Make sure the water tank is inserted
as far as it will go on the gasket.
Step 7: (bleeding)
Switch the appliance on.
The operation pilot lamp glows
permanently.
The appliance heats up and the
red temperature pilot lamp glows
permanently.
When the lamp extinguishes, the
appliance is ready for use.