Heat Level Control; Operation - Silvercrest SKGE 2000 C3 Bedienungsanleitung

Heat level control

The temperature is set using the heat level control 6 .
–
Heat level range 1: heating up range / low temperature
–
Heat level range 2: medium temperature (e . g . cooking vegetables)
–
Heat level range 3: high temperature (e .g . grill-roasting meat)
Heat level range 3
NOTE
► The green control lamp "Ready" 5 lights up when the heat level control 6
is set at MIN . As soon as you set the heat level control 6 to the desired
position, the green control lamp "Ready" 5 goes out until the temperature
has been reached .
► The green control lamp "Ready" 5 may switch off again in the interim . This
indicates that the temperature has fallen below the set temperature and the
appliance is heating up again .
► The red control lamp "Power" 4 lights up as soon as the appliance is con-
nected to the mains .

Operation

1) Close the appliance lid using the handle .
2) Slide the fat collector tray 7 into the appliance .
3) Replace the plug in the mains power socket . The red control lamp "Power" 4
lights up . The green control light "Ready" 5 lights up if the heat level control 6
is set to MIN .
4) Set the desired level on the heat level control 6 . The green control lamp
"Ready" 5 goes out . The green control lamp "Ready" 5 comes on again
as soon as the set heating level is reached .
■ 88 │ GB │ MT
Heat level range 1
Heat level range 2
SKGE 2000 C3