Heat Level Control; Operation - Silvercrest SKGE 2000 B2 Bedienungsanleitung

Heat level control

Operation

■ 10
Downloaded from www.Manualslib.com
The temperature is set using the heat level control
–
Heat level range 1:
–
Heat level range 2:
–
Heat level range 3:
Heat level range 3
NOTE
► The green control lamp "Ready"
is set at MIN. As soon as you set the heat level control
position, the green control lamp "Ready"
has been reached.
► The green control lamp "Ready"
indicates that the temperature has fallen below the set temperature and the
appliance is heating up again.
► The red control lamp "Power"
nected to the mains.
1) Close the appliance lid using the handle.
2) Slide the fat collector tray
3) Replace the plug in the mains power socket. The red control lamp "Power"
lights up. The green control light "Ready"
is set to MIN.
4) Set the desired level on the heat level control
"Ready" goes out. The green control lamp "Ready"
as soon as the set heating level is reached.
│
GB
manuals search engine
.
heating up range / low temperature
medium temperature (e.g. cooking vegetables)
high temperature (e.g. grill-roasting meat)
Heat level range 1
Heat level range 2
lights up when the heat level control
goes out until the temperature
may switch off again in the interim. This
lights up as soon as the appliance is con-
into the appliance.
lights up if the heat level control
. The green control lamp
to the desired
comes on again
SKGE 2000 B2