Siemens SIPART PS2 Kompaktbetriebsanleitung Seite 4

1.2 History
The following table shows the most important changes in the documentation compared to the previous edition.
Edition Comment
07 Diverse changes to the instructions due to a certificate update
01/2012
● New nameplate in chapter "Introduction"
08
07/2012
● Changes in chapter "Mounting"
● Revision chapter "Technical data"
● New chapter "Spare part"
1.3 Checking the consignment
Check the device packaging for damage. Inform your supplier of any damage. Retain the damaged parts for clarification.
Check the scope of delivery by comparing the shipping documents with your order for correctness and completeness.
Do not take damaged or incomplete devices into operation under any circumstances.
Special conditions for storage and transportation of device listed in Section "Technical specifications (Page 16)".
1.4 Design of the nameplate
N C S S ensor
Ta = -40...70(T6)/90(T4)°C
TÜV 10 ATEX 555781X II 2 G Ex ia IIC T6/T4 Gb
IS, CL I, DIV 1,ABCD / IS, CL I, ZN 1 AEx ib IIC
NI, CL I, DIV 2, ABCD / NI CL I, ZN 2, IIC
APPROVED Install per contr. Dwg. A5E00078040L
IP68 / NEMA 4X / Encl. Type 4X
0044
Technical data and temperature classes see certificate
Siemens AG, Industry Sector
①
Manufacturer
②
Approvals
③
ATEX/IECEx marking for hazardous area
④
Order number
⑤
Manufacturer serial number
Figure 1-1 Nameplate layout, example
4
II 3 G Ex ic IIC T6/T4 Gc
II 3 G Ex nA IIC T6/T4 Gc
76181 Karlsruhe, Germany
MADE IN FRANCE
KCC-REM
S49-NCS
⑥
FM/CSA marking for hazardous area
⑦
Consult operating instructions
⑧
Place of manufacture
⑨
Safety class
⑩
Product name
SIPART PS2 Non Contacting Sensor (NCS)
A5E00097485-08, 07/2012