Maintenance - Beninca YAK 25 OTI Bedienungsanleitung

YAK25.OTI
• Do not stand within the gate movement area.
• Children must not play with controls and near the gate.
• In the event of malfunctions, do not attempt to repair the failure but contact the specialised personnel.
In the event of power failure or malfunction, to manually operate the gate proceed as follows:
• After inserting the customized key C, turn it anti-clockwise and pull the lever L.
• The geared motor is unlocked and the gate can be moved by hand.
• To return to the normal operating mode, close the lever L again and manually activate the gate until it is geared.
• Prepare and implement a maintenance plan.
• Every month check the good operation of the emergency manual release.
• It is mandatory not to carry out extraordinary maintenance or repairs as accidents may be caused.These operations must be
carried out by qualified personnel only.
• It is necessary to check the efficiency of the safety devices and the other parts of the system that could create hazards due to
wear at least every 6 months. Wear and tear of some components could cause dangers.
As indicated by the symbol shown, it is forbidden to dispose this product as normal urban waste as some parts might
be harmful for environment and human health, if they are disposed of incorrectly. Therefore, the device should be dis-
posed in special collection platforms or given back to the reseller if a new and similar device is purchased. An incorrect
disposal of the device will result in fines applied to the user, as provided for by regulations in force.
USER'S HANDBOOK
SAFETY MEASURES
MANUAL AND EMERGENCY MANOEUVRE
WASTE DISPOSAL
C

MAINTENANCE

L
75