Unpacking; Installation; Installing A Plug On The Power Cord - JB-Lighting P7 Bedienungsanleitung

P7
Operate the device only after having familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional
operation!
! WARNING: The lamp has to be replaced when it is damaged or deformed due to the
heat!
Please use the original packaging or special designed flight cases if the device is to be trans-
ported.
! WARNING: To avoid damage of the internal parts of the fixture head, never let the
sunlight lights directly to the front lens, even when the fixture is not working!

3.2 Unpacking

This package contains the P7, two omega brackets with 1/4 turn fasteners, as well as a power
cable with PowerCon connector (no cable in US model, only PowerCon connector). This man-
ual is included 1 time per shipment. Open the top of the box and remove the inlay. Remove the
unit from the box. For any damage occurring during transport, report to the transport company
immediately.

4. Installation

4.1 Installing a plug on the power cord

!
WARNING: To ensure proper installation of the plug consult a qualified technician!
The P7 is supplied with a power cable with a Neutrik PowerCon connector. Install a 3-prong
grounding type plug that fits your supply. US model comes only with PowerCon connector. Con-
nected load: voltage 100-240 V, frequency 50 - 60 Hz
Connection in Germany / Europe:
Color
brown
blue
green/yellow
- 32 -
Function Symbol
live „L"
neutral „N"
ground „PE"