Gobo Exchange; Gobo Size - JB-Lighting P7 Bedienungsanleitung

P7

7.2 Gobo exchange

To open the P7 on the correct side
put it on a rigid board, have a look,
that the display looks to you (1), the
tilt lock is on the right side (2) and the
head of the P7 looks from you away (3).
To open the head turn the three
screws (4) 1/2 turn left, open the cov-
er and dismount the internal safety
lock.
Loosen knurled head screws (5) and
remove the gobo module. Following
picture shows the gobo module.

7.3 Gobo size

If you want to order custom made glass gobos, have a look at the technical diagram.
Image diameter: 23,00 mm
Outside diameter: 27,90 mm(+0/-0,2mm)
- 48 -
4
2
1
The gobos are fixed by means of a spring. To ex-
change a gobo press the gobo including the ring
out of the holder. Insert the new gobo and readjust
the spring to fix the gobo. For metal gobos make
sure that the black coated side of gobo looks to the
objective and for glass gobos make sure that the
coated side is also positioned in direction of the ob-
jective. Gobos which are not intended to rotate , for
example, logos, we recommend against turning to
secure this addition with a drop silicone.
5
3