Cab - GOLDONI 3000 Star series Bedienung Und Instandhaltung

5.3 CAB

Safety notes
a) Always shut the doors before moving off with the tractor.
b) Keep the windows clean to ensure good visibility.
c) The cab is approved as a safety structure. It is therefore absolutely forbidden
to tamper with it, modify or add extra equipment and/or supports.
Versions
The machine can be equipped with a cab in three different versions:
• Cab without ventilation (Basic version)
• Cab with heating function (Top Calda) – see fig. 31
• Cab with heating and air conditioning (Top Fredda) – see fig. 32
Accessories: activated carbon filter and revolving beacon.
Cab identification
To identify the cab, consult the metal data plate affixed inside on the rear cross-
member (N° 1 fig. 33). It lists the following information:
• Manufacturer
• Type
• Serial number (chassis number)
5.3.1 Heating and ventilating
The ventilation function is operated by means of the control (N° 1 fig. 31 and
32). Direct the air flow by positioning front vents N° 4 fig. 31 and 32 as required.
The air can be drawn from the outside or from inside the cab by means of vents
N° 2 fig. 31 and 32:
• vents closed: the air is drawn from the outside through the filter.
• vents open: most of the air is drawn from the inside through the vents
themselves.
The heating function is operated by means of control N° 3 fig. 31 and 32 (a
=open; c = closed). Vary the ventilation speed by means of control N° 1 fig. 31
and 32.
82