Transporting The Tractor With The Engine Off; Cab And Roll Bar; Safety Frame (Roll-Bar Or Rops) - GOLDONI IDEA SERIE Bedienung Und Instandhaltung

4.9.2.3 Front auxiliary spooling valve
(optional)
The implement coupled to the front auxiliary spooling valve can be operated by
the joystick n.27 fig.1, used for the front hydraulic lift. See fig.6:
N = Neutral
A - B = Hydraulic fluid sent to the corresponding couple.
F = Lever all the way to the right with lever locked: implement coupled in
floating mode.
4.10 TRANSPORTING THE TRACTOR WITH THE ENGINE
OFF
In order to move the tractor when the engine is off, put the mechanical
transmission in neutral using lever n.20 fig.1(see fig.10).
Before using the lever, pull out knob n.21. fig.1 (n.1 fig.10).
Lever in position 2: lever moved forward: the gear is engaged and the tractor
Lever in position 3: lever moved backwards: the gear is in neutral and the tractor

5. CAB AND ROLL BAR

(optional)
- For Italy
If the cab or roll bar are installed after the tractor has been purchased, the
customer should ask for the Certificates of Approval from Goldoni Commercial
Division.
With these certificates and the tractor Log Book, the customer should go to the
requisite Ministry of Transport Office to update the Log Book or have a new one
issued.
- For other countries
If the cab or roll bar are installed after the tractor was purchased, the customer
should contact the requisite approval authority in order to update the Log Book
as required.

5.1 SAFETY FRAME (roll-bar or ROPS)

The machine is equipped with a folding safety frame. Always keep the safety
frame mounted in its correct vertical position when you are working. It is
absolutely forbidden to modify the structural components of this type of
construction by welding on additional parts, drilling holes, grinding, etc. Failure to
comply with these recommendations could impair the rigidity of the frame itself.
The safety frame is subjected to considerable stress if the tractor tips over. If this
happens, the structural components must be replaced if they have been bent,
deformed or damaged in some other way.
cannot be moved in manual mode.
can be moved with the engine off.
85