Renishaw REVO-2 Handbuch Seite 36

REVO-2 user's guide
www.renishaw.com
The electrical contacts indicated with arrows in the image below should be carefully cleaned using an alcohol based cleaner.
Optical windows should be cleaned by first blowing or brushing away any debris followed by wiping with a lint-free cloth and a suitable
alcohol based cleaner such as isopropyl alcohol (IPA).
Styli maintenance
Stylus balls, threads and mating faces should be cleaned using a proprietary cleaning cloth or solvent. Stylus balls should be regularly
inspected for damage or 'pick‐up' of component material.
Renishaw offers a range of ball materials suited to scanning of different component materials. See the Styli and accessories - technical
specifications guide (Renishaw part number H-1000-3200).
SFA maintenance
Periodically visually inspect the SFA for scratches.
Rack port maintenance
CAUTION: Always refer to the 'Safety' and 'Warnings' sections of this guide. Failure to do so could lead to personal injury.
Periodic cleaning of the ports, lids and outer surfaces, using a soft, lint free cloth, is recommended to prevent contamination of stored probes
and modules.
A port replacement kit for FCR25 is available to allow the user to service ports should they become worn or damaged (Renishaw part number
A-5036-0049).
A lid replacement kit for RCP2 is also available (Renishaw part number A-3061-1962).
Issued 10 2019
36