Renishaw REVO-2 Handbuch Seite 33

REVO-2 user's guide
www.renishaw.com
Fitting the REVO datum sphere
Kit contents
NOTE: The calibration diameter of the sphere is engraved on the stem. Please ensure the exact value is used when commissioning
the system.
The REVO datum sphere kits consist of the following:
Part description
Datum ball
Fixing studs (adaptor studs)
Fixing studs (adaptor studs)
Fixing studs (adaptor studs)
Fixing studs (adaptor studs)
Fixing studs (adaptor studs)
Base
C spanner
Tommy bar ﴾×2﴿
* NOTE: Grooves on the fixing stud are to differentiate between metric and imperial measures. They are not a functional feature.
Issued 10 2019
Technical specification
Ø30 mm or optional Ø45 mm
M6 × 1
M8 × 1.25
M10 × 1.5
5/16 in UNC (double groove)*
3/8 in UNC (single groove)*
Ø60 mm
n/a
n/a
33