Renishaw REVO-2 Handbuch Seite 21

REVO-2 user's guide
www.renishaw.com
Head axis range
The REVO-2 head has two rotary axes (A and B) and is normally mounted on the CMM quill to create a 5-axis measuring system. The REVO-2
head's B-axis is mounted on the CMM quill and can rotate continuously in both directions. The A-axis, which is orthogonal to the B-axis, has
220° of travel. The head can only be mounted in the vertical orientation shown below:
* This movement is for calibration and use of RSP3 probes only.
Issued 10 2019
21