Dometic FRIGO Bedienungsanleitung Seite 16

Operation
Automatic defrosting
An electronic controller starts this process after every complete operating hour.
I
NOTE
When transporting or storing moist goods, we recommend using man-
ual defrosting more often (see chapter "Manual defrosting" on page 16).
During the defrost cycle, the upper line of the display shows "deF". The bottom line
of the display shows the target temperature. The following indicators appear on the
display:
Air circulation defrosting
Symbol is visible
Symbol not visible
Symbol is visible
After the defrosting process, the system switches back to cooling automatically. This
process can also be seen on the display:
Symbol not visible
Symbol is visible
Symbol flashes, activation of the blower is delayed after defrosting.
After activation, the symbol is visible
Manual defrosting
The manual defrosting process can be started via the control display as follows:
➤ Press the
button for at least 2 seconds.
✓ The defrosting process starts as described in chapter "Automatic defrosting" on
page 16.
16
Hot gas defrosting
Symbol is visible / flashes during the drip
period
Symbol is visible
Symbol not visible/
flashes during the drip period
Frigo
EN