20 8.3 Connecting Pressure Sensor - Bosch CRI 848H Einbauanleitung

en �0 | CRI�CRI� ���� | Calibrating the high-pressure rail
6.
Hose line (Fig. 21, Pos. 3) to distributor (Fig. 21,
Pos. 1) and return terminal (Fig. 21, Pos. 2).
3
2
Fig. 21: Connecting return line
|
1 689 978 562 2012-03-29
�.�
i
The first time the pressure sensor is used, the
operating system twice prompts the user to install
a driver. (only in Windows 2000) Select "Search for
appropriate driver for device (recommended)" and
then "State other source". The driver is stored under
"C:\BOSC�_PR\EPS9�5\DRIVERS\BURSTER" (up to
EP software version 2011/A) or under
"C:\BOSC�_PR\EPS9�5\DRIVERS\BURSTER\X�6"
(from EP software version 2011/B).
1. Connect the pressure sensor with the inlet connec-
1
tion of the high pressure rail.
Tightening torque: 25 — 30 Nm
2. Connect the USB cable to the free USB port of the
KMA PC.
3
Fig. 22:
1 KMA PC
2 USB cable
3 Converter
4 Pressure sensor
Connecting pressure sensor
1
X9
V
BOSCH
I
D
E
O
X7 LPT1
X2 Mouse
X25 USB1
1
X1 Kayboard X3 COM1 X4 COM2
0
X26 USB2
2
4
Pressure sensor connection
X28
S
X27
V
C
T
A
N W
1
X29
S
V
T
W
2
458845-29_Pal
Robert Bosch GmbH