Elcometer 506 Bedienungsanleitung Seite 2

R
For the avoidance of doubt, please refer to the original English language version.
The Elcometer 506 Digital Adhesion Tester meets the Electromagnetic Compatibility Directive. The product is Class B, Group 1 ISM equipment
according to CISPR 11. Group 1 ISM product: A product in which there is intentionally generated and/or used conductively coupled radio-frequency
energy which is necessary for the internal functioning of the equipment itself. Class B product are suitable for use in domestic establishments and in
establishments directly connected to a low voltage power supply network which supplies buildings used for domestic purposes.
A Material Safety Data Sheets for adhesive supplied by Elcometer can be downloaded via our website:
Araldite Standard Two Part Epoxy Adhesive: www.elcometer.com/images/MSDS/araldite_epoxy_adhesive.pdf
The pressure gauge supplied with the Elcometer 506 Digital Adhesion Tester is intended for use only as an integral part of the instrument and should not be
removed by the user and used elsewhere.
is a registered trademark of Elcometer Limited, Edge Lane, Manchester, M43 6BU. United Kingdom
R
All other trademarks acknowledged.
Gauge dimensions: Instrument Length: 290mm (11.5")
Gauge Weight: With 14.2mm & 20mm Standard Dolly Skirt: 1.8kgs (4lbs); With 50mm Standard Dolly Skirt: 2.0kgs (4.4lbs)
© Elcometer Limited 2012 - 2013. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored (in a retrieval system or
otherwise) or translated into any language, in any form or by any means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written
permission of Elcometer Limited.
TMA-0564 Issue 04 - Text with cover 23792