Product Overview - Hach SC4200c Basis-Benutzerhandbuch

interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil est
conforme aux limites d'exposition aux rayonnements de la IC pour un environnement non contrôlé.

Product overview

Chemical or biological hazards. If this instrument is used to monitor a treatment process and/or
chemical feed system for which there are regulatory limits and monitoring requirements related to
public health, public safety, food or beverage manufacture or processing, it is the responsibility of the
user of this instrument to know and abide by any applicable regulation and to have sufficient and
appropriate mechanisms in place for compliance with applicable regulations in the event of malfunction
of the instrument.
The SC4200c is a 2-channel controller for digital sensors. Refer to
The controller is configured and operated with a Mobile sensor management (MSM) software. The
MSM software is accessible through a web application on a customer-supplied device with an
internet browser that is connected to the internet. The controller connects to the MSM software with a
cellular network (optional), WiFi network (optional) or through LAN connection. The MSM software is
also referred as Cloud in this manual.
The controller is available with optional expansion modules. Refer to the expanded user manual for
additional information.
Figure 1 Product overview
1 Label for module installation
2 Power indicator light
3
3 SIM card
4
4 Expansion module
5 Additional expansion module slots
3
Dependent on controller configuration. The SIM card is factory installed in cellular versions.
4
Dependent on controller configuration.
D A N G E R
6 USB connection
7 USB cover
8 Electrical connections and fittings
9 Cover for module installation
10 High-voltage barrier
Figure 1.
English 7