Ironing Without Steam; After Ironing; Spray Function - Philips GC4444 Bedienungsanleitung

EnGlish
10
 Press and hold the Ionic DeepSteam button (Fig. ).
The Ionic DeepSteam light goes on and you hear a humming
,
sound. (Fig. 10)
 The iron now produces Ionic DeepSteam to help you remove even
the toughest creases.
Note: The Ionic DeepSteam function is only effective when it is used in
combination with a steam setting and a temperature setting between 2
and MAX.
Note: Do not use the Ionic DeepSteam function when you iron without steam
and/or at low temperature settings. However, ironing at low temperatures
without steam with the Ionic DeepSteam function switched on will not
damage the iron.
Note: The Ionic DeepSteam output may vary from time to time, depending on
the ironing temperature.

Ironing without steam

1 Set the steam control to position 0 (= no steam) (Fig. ).
Do not use the Ionic DeepSteam function, as this function does not
have an effect when you iron without steam
 Select the recommended ironing temperature (see chapter
'Preparing for use').

after ironing

1 Remove the mains plug from the wall socket.
 If you have been steam ironing, empty the water tank.
 Let the iron cool down in a safe place.
Features

Spray function

You can use the spray function to remove stubborn creases at any
temperature.