Ironing Without Steam; Spray Function - Philips GC4440 Bedienungsanleitung

ENGLISH
10
The ionic function is only effective when it is used in combination with a
B
steam setting and a temperature setting between 2 and MAX.
Switch off the ionic steam function when ironing without steam and/or
at low temperature settings. However, ironing at low temperatures
without steam with the ionic function switched on will not damage the
iron.
The ionic steam output may vary from time to time, depending on the
B
ironing temperature.

Ironing without steam

1 Set the steam control to position 0 (= no steam) (fig. 2).
2 Make sure the ionic function is off.
3 Select the recommended ironing temperature (see chapter
'Preparing for use').
Features

Spray function

You can use the spray function to remove stubborn creases at any
temperature.
1 Make sure that there is enough water in the water tank.
2 Press the spray button several times to moisten the article to be
ironed (fig. 11).
Concentrated steam boost from the special Steam Tip
A shot of steam from the soleplate helps remove stubborn creases.The
steam boost enhances the distribution of steam into every part of your
garment.
The steam boost function can only be used at temperature settings
between 2 and MAX.
1 Press and release the steam boost button (fig. 12).