Using The Appliance; Steam Ironing - Philips GC4444 Bedienungsanleitung

Silk, woollen and synthetic materials: iron the reverse side of the fabric to
prevent shiny patches. Avoid using the spray function to prevent stains.
Start ironing the articles that require the lowest ironing temperature,
such as those made of synthetic fibres.
 Put the mains plug in an earthed wall socket.
The amber temperature light goes on (Fig. ).
,
 When the amber temperature light has gone out, wait a while
before you start ironing.
The temperature light will go on from time to time during ironing.

using the appliance

steam ironing

1 Make sure that there is enough water in the water tank.
 Select the recommended ironing temperature (see chapter
'Preparing for use').
 Select the appropriate steam setting. Make sure that the steam
setting you select is suitable for the ironing temperature
selected: (Fig. 8)
- 1 - 3 for moderate steam (temperature settings 2 to 3)
- 4 - 6 for strong steam (temperature settings 3 to MAX)
Note: The iron will start steaming as soon as the set temperature has been
reached.
Note: If the selected ironing temperature is too low (MIN to 2) water may
drip from the soleplate (see section 'Drip stop').
ironing with ionic Deepsteam (GC4444/GC4440/GC4430
only)
When you use the Ionic DeepSteam function during steam ironing, the
steam produced is finer than during regular steam ironing. Fine steam
reaches deeper into the fabric. This helps you to easily remove stubborn
creases.
1 Follow steps 1 to 3 in section 'Steam ironing'.
EnGlish