Philips GC4444 Bedienungsanleitung Seite 13

Double-Active Calc System
The anti-calc tablet prevents scale from clogging the steam vents.
,
The anti-calc tablet is constantly active and does not need
,
replacement.
The Calc-Clean function removes the scale particles.
,
Use the Calc-Clean function once every two weeks. If the water in your
area is very hard (i.e. when flakes come out of the soleplate during
ironing), the Calc-Clean function should be used more frequently.
1 Make sure the appliance is unplugged.
 Set the steam control to position 0.
 Fill the water tank to the maximum level.
Do not put vinegar or other descaling agents in the water tank.
 Select the maximum ironing temperature (Fig. 16).
5 Put the plug in an earthed wall socket.
6 Unplug the iron when the temperature light has gone out.
 Hold the iron over the sink, press and hold the Calc-Clean button
and gently shake the iron to and fro (Fig. 1).
Steam and boiling water will come out of the soleplate. Impurities and
flakes (if any) will be flushed out.
8 Release the Calc-Clean button as soon as all the water in the tank
has been used up.
Repeat the Calc-Clean process if the iron still contains a lot of impurities.
After the Calc-Clean process
- Put the plug in the wall socket and let the iron heat up to allow the
soleplate to dry.
- Unplug the iron when it has reached the set ironing temperature.
- Move the hot iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
- Let the iron cool down before you store it.
EnGlish
1