Using The Appliance; Ironing Without Steam - Philips Mistral GC2425 Bedienungsanleitung

ENGLISH
8
3 When the temperature light has gone out, wait a while before
you start ironing.
The temperature light will go on from time to time during ironing.
B

Using the appliance

Steam ironing
Make sure that there is enough water in the water tank.
1 Set the temperature dial to the recommended position.
See 'Setting the temperature'.
C
2 Set the steam control to the appropriate steam position.
- Á for minimum steam (temperature settings 2 and 3).
- Ë for moderate steam (temperature settings 3 to MAX)
(specific types only).
- È for maximum steam (temperature settings 3 to MAX).
Steaming will start as soon as the set temperature has been reached.
B
GC2415/2320/2315/2310/2305 only:
Water may leak from the soleplate if the set temperature is too low
(MIN to 2).

Ironing without steam

Set the steam control to position O (= no steam).
1
2 Set the temperature dial to the recommended position.
See 'Setting the temperature'.
Features
Spraying
To remove stubborn creases at any temperature
1 Make sure that there is enough water in the water tank.
C
2 Press the spray button several times to moisten the garment to
be ironed.