Silvercrest SBLP 4.2 A1 Bedienungsanleitung Und Sicherheitshinweise Seite 49

If the operating LED (7) does not flash blue on either of the
speakers, this means that a Bluetooth
been established. Press the Bluetooth
corresponding speaker to disconnect Bluetooth
is now in pairing mode and a new connection can be
established.
 Now pair the two speakers by briefly pressing the Bluetooth button (3) on
one of the speakers.
 One of the speakers will now confirm the connection setup with a blue
operating LED (7). The operating LED (7) on the two speakers will
continue to flash blue.
 Now connect your smartphone or player to the speakers via Bluetooth
To do so, refer to your smartphone manual. From the list of devices
detected, select device 'SBLP 4.2 A1' and establish the connection. Enter
'000' if you are asked for a PIN.
 The second speaker emits an acoustic signal to confirm the setup of the
connection, and the operating LED (7) is lit blue.
 You will know when the connection has been established successfully, as
the operating LED will light up blue (7) on both speakers.
SilverCrest SBLP 4.2 A1
®
connection has already
®
button (3) on the
®
. The speaker
®
.
English - 47